home *** CD-ROM | disk | FTP | other *** search
/ BBS Toolkit / BBS Toolkit.iso / doors_2 / prod352.zip / WHATS.NEW < prev   
Text File  |  1993-03-04  |  14KB  |  268 lines

  1.  
  2.             ┌──────────────────────────────────────────────┐
  3.             │          Forbes Development Company          │
  4.             │                                              │
  5.             │   New ProDOOR/ProLON Enhancements/Features   │
  6.             │           Copyright  1992, 1993              │
  7.             │            All Rights Reserved               │
  8.             └──────────────────────────────────────────────┘
  9.  
  10.  
  11.  
  12. Installation:  <-- Do it RIGHT or, EXPECT problems.
  13. -------------
  14.   Before we start, the INSTALL.EXE will work for ANY and ALL
  15.   versions of the new releases.  ProDoor, ProLON, even the
  16.   Overlay versions of ProDoor if thats what you grabbed.
  17.  
  18.   The program will automatically detect what needs to be
  19.   installed and then adjust its menus accordingly.
  20.  
  21.   Ok, lets install the INSTALL program...
  22.  
  23.   Put ALL of the new files (including the INSTALL files) in one
  24.   new clean/empty directory. Call it NEWSTUFF, or PATS, or ANYTHING,
  25.   it don't matter.... just make sure that ALL the NEW stuff gets put
  26.   into that one new directory.  We don't wanna blow any files before
  27.   we've had a chance to check this stuff out..... right??
  28.  
  29.   Unless you wanna be "ULTRA-SAFE", don't worry about backups of
  30.   your existing files.  The INSTALL program will do that for you.
  31.  
  32.   Ok now, get into the new directory, type INSTALL program and,
  33.   "Follow Your Nose".  Hopefully, it'll all make sense to you.
  34.  
  35.  
  36.   Good Luck, and Enjoy.
  37.   <Pat>
  38.  
  39.  
  40. Preface:  <-- IMPORTANT !!   There is a TON of info in INSTALL.EXE
  41. --------
  42.   First of all, you should spend a LOT of time in the INSTALL.EXE
  43.   program.  Not installing the upgrade... that'll only take a FEW
  44.   minutes at most.   Hit the HELP functions in INSTALL.  There is
  45.   a TON of info in there.... all about the changes, how to use
  46.   them, what they do, and don't do, etc.
  47.  
  48.   There is a HELP screen (usually a LOT of help screenS) on every
  49.   item, on every menu, and every conceivable place I could put one
  50.   in the Install program.  Help yes... but actually, more of a
  51.   "Documentaion" feature rather than help.  Install the upgrade,
  52.   get it running, then flip back into INSTALL to hit the HELP
  53.   screens.  There is a WEALTH of information in there!!
  54.  
  55.   I won't say anything about the SECOND release except, it will
  56.   follow the 1st release within 30 days and... it will be a MAJOR
  57.   upgrade.  Features?  Too Confidential.  If I told you, I'd have
  58.   to kill you.
  59.  
  60.  
  61.   Now for the 1.31/3.51 changes:
  62.   ------------------------------
  63.   This was my PUNCH-LIST of changes made to ProDOOR.  The list
  64.   is NOT all-inclusive... heck, it's a FREE upgrade so I didn't
  65.   spend a lot of time making it pretty, or complete.
  66.  
  67.   One thing I did do (and now regret), is that I changed a few
  68.   internal prompts.  Means some of your translations may no longer
  69.   work.  I can only think of two off the top of my head and they
  70.   were both associated with the "Visual Editor".  I think I changed
  71.   them to say "Full Screen" editor.  Can't remember for sure...
  72.  
  73.  
  74.   New ProDOOR command:  <-- New since 3.50
  75.   --------------------
  76.   Ever wanted to get on a node and not let everyone know
  77.   you were on ??  Type SILENT once in ProDoor and bingo,
  78.   you ain't there !!  Type NODE to confirm it.
  79.  
  80.   NOTE:  This is security-level sensitive... only those
  81.   with security level = 100 or higher can use it.
  82.   However, as a sysop, you can type it on the command
  83.   line for ANY caller, regardless of their security
  84.   level.
  85.  
  86.   New ProDoor/ProLogon F Keys.  <-- New since 3.5/1.3
  87.   ---------------------------
  88.   I really missed the F1 for Temp-Sysop privledges.
  89.   Also missed the Right/Left arrows for temporarily changing
  90.   a caller's security level too.  I don't miss them now !!
  91.   Yep, they be here!!
  92.  
  93.   You can use these keys from ProLon or ProDoor.  Nice
  94.   in ProLogon to qwikly force a caller into another
  95.   door.
  96.  
  97.   NOTE:  Unless you hit the F1 for Temp-Sysop, the
  98.   caller's security will return to normal if they
  99.   exit to a door, and then return to ProDoor.
  100.   (Security reasons...)
  101.  
  102.  
  103. ProDoor V3.51 Changes/Fixes                           Type    Status
  104. ---------------------------------------------------  -------  -------
  105.   -   New command: SILENT... no one knows you're on    New    (done)
  106.   -   F1 - Temp Sysop Privledges...................    New    (done)
  107.   -   Right/Left Arrow Keys - Temp Raise/Lower Sec.    New    (done)
  108.   -   More logging of errors/exceptions............    New    (done)
  109.   -   If STRICT ON, dump if more than 10 errors....    New    (done)
  110.   -   Missing UB DB R+ R- Y+ Y- from valid commands  **BUG**  (done)
  111.  
  112. ProDoor V3.50 Changes/Fixes                           Type    Status
  113. ---------------------------------------------------  -------  -------
  114.   -   Setup/Installation program...................    New    (done)
  115.   -   colors being reset on each line in msg base..  **???**  (done)
  116.   -   range error on ANSIs in msg>max length.......  **BUG**  (done)
  117.   -   range error on L/Z search if filename>8 char.  **BUG**  (done)
  118.   -   Bug in DISP- handler.........................  **BUG**  (done)
  119.   -   fix colorizing of DIRS on scans and locates..  **BUG**  (done)
  120.   -   allow strict command interpetation...........    New    (done)
  121.         setable "display error msg" or ignore......    New    (done)
  122.         setable log error to caller log............    New    (done)
  123.   -   Pass security level to $$LOGOFF.BAT as %1....    New
  124.   -   Document changes with Announcement...........    New
  125.   -   Upload ascii text in message.................  **BUG**   ????
  126.   -   INSERT key not working during visual edit....  **BUG**  (done)
  127.   -   Setable EXT check on uploads.................    New
  128.   -   security level to override dup upload........    New    (done)
  129.   -   security level to see idle time..............    New    (done)
  130.   -   setable [FLOW] display.......................    New    (done)
  131.   -   security level to see 1st msg line on Q......    New    (done)
  132.   -   level required to see idle time in chat......    New    (done)
  133.   -   monitor  calls...............................    New    (done)
  134.          - new callers.............................    New    (done)
  135.          - msgs....................................    New    (done)
  136.          - uploads.................................    New    (done)
  137.          - dnloads.................................    New    (done)
  138.   -   New LogEXEC- Logs EXEC- usage to caller log..    New    (done)
  139.   -   New LogDISP- Logs DISP- usage to caller log..    New    (done)
  140.   -   New @LUSER  (Upper/Lower case Caller Name....    New    (done)
  141.   -   New @HOTKEYS, YES or NO......................    New    (done)
  142.   -   New @CHATPAGE, YES or NO.....................    New    (done)
  143.   -   New @EARNBYTES, Earned DL Bytes..............    New    (done)
  144.   -   New @LOGOFF, Will force auto-logoff..........    New    (done)
  145.   -   Allow DISP- in Shift F Macros keys...........    New    (done)
  146.   -   Allow LOGDISP- in Shift F Macros keys........    New    (done)
  147.   -   Allow EXEC- in Shift F Macros keys...........    New    (done)
  148.   -   Allow LOGEXEC- in Shift F Macros keys........    New    (done)
  149.  
  150.  
  151. :---- New Sets  ------------------------
  152. These are the DEFAULTS for the new SETS.  With the exception of the
  153. first one (usage file), NONE are required UNLESS you don't like my
  154. defaults.  If you have the PRE-Release 3.5/1.3 version, you can
  155. now remove ALL but this first one.
  156.  
  157. NOTE:  Upper/Lower case is NOT important BUT... WATCH THE SPACING!!
  158.        There is NO SPACE between the "=" signs and the values!!
  159.  
  160. set usage_file=prostats.dat   ; BBS usage data file
  161.                               ; This one is REQUIRED if you have
  162.                               ; multi-node and want to track usage
  163.                               ; for ALL nodes.
  164.                               ;
  165. set show_flow=OFF             ; eliminates the word [FLOW]
  166. set see_idle=100              ; level required to see idle time
  167. set see_msgline=100           ; level required to see 1st line in Q
  168. set upload_dups=100           ; level to duplicate existing upload
  169. set strict_commands=ON        ; strict interpetation of commands
  170. set show_errors=ON            ; show error, or ignore with no msg
  171. set log_command_errors=ON     ; log command errs to caller log
  172. set allow_disp=OFF            ; totally disable DISP in displays
  173. set max_disp_loc=30           ; ignore any DISP- past column 30
  174. set save_missing_desc=ON      ; no more lost upload descriptions
  175. :---------------------------------------------------
  176.  
  177. Notes:
  178. ------
  179.   1.  You'll note that there are some really "needed" features
  180.       that are MISSING - such as DOOR.SYS, USERS.SYS, and a "few"
  181.       (actually not so few) more necessities.
  182.  
  183.       Not to fear... they are coming soon.   We wanted to get this
  184.       first release out as qwikly as possible and there was NOT
  185.       enough time to get everything coded and THROUGHLY tested.
  186.  
  187.  
  188.  
  189.  
  190. ProLON V1.31 Changes/Fixes                            Type    Status
  191. ---------------------------------------------------  -------  -------
  192.   -   F1 - Temp Sysop Privledges... NEW SINCE 1.3..    New    (done)
  193.   -   Right/Left Arrow Keys - Temp Raise/Lower Sec.    New    (done)
  194.   -   Date/Time put back on call-waiting screen....    New    (done)
  195.   -   Added PROMPT when FORCE is on................    New    (done)
  196.   -   Skipping first keyword in PROLON.CNF.........    New    (done)
  197.  
  198. ProLON V1.30 Changes/Fixes                            Type    Status
  199. ---------------------------------------------------  -------  -------
  200.   -   Setup/Installation program...................    New    (done)
  201.   -   Pass security level to $$LOGON.BAT as %1.....    New    (done)
  202.   -   Force Message Scan...........................    New    (done)
  203.   -     -  Scan ALL conferences....................    New    (done)
  204.         -  Scan MAIN only..........................    New    (done)
  205.         -  Scan Selected Conferences...............    New      ??
  206.         -  Command to use on force scan (Y/N/S)....    New    (done)
  207.   -   Allow entry of KEYWORD at Services Menu......    New    (done)
  208.   -   Get rid of the node update in prowait........    New    (done)
  209.   -   Remove node update on modem reset............    New    (done)
  210.   -   Change propanel screen for new stuff.........    New    (done)
  211.   -   Add usage stats for BBS......................    New    (done)
  212.        - monitor:  calls...........................    New    (done)
  213.            new callers.............................    New    (done)
  214.            msgs....................................    New    (done)
  215.            uploads.................................    New    (done)
  216.            dnloads.................................    New    (done)
  217.        - read usage file, create if missing........    New    (done)
  218.        - update key to zero usage stats............    New    (done)
  219.        - toggle key from node to bbs stats.........    New    (done)
  220.   -   setable "+" on blank screen..................    New    (done)
  221.   -   New @LUSER   (Upper/Lower case Caller Name...    New    (done)
  222.   -   New @HOTKEYS , YES or NO.....................    New    (done)
  223.   -   New @CHATPAGE , YES or NO....................    New    (done)
  224.   -   New @EARNBYTES , Earned DL Bytes.............    New    (done)
  225.   -   New @LOGOFF , Will force auto-logoff.........    New    (done)
  226.   -   Allow DISP- in Shift F Macros keys...........    New    (done)
  227.   -   Allow LOGDISP- in Shift F Macros keys........    New    (done)
  228.   -   Allow EXEC- in Shift F Macros keys...........    New    (done)
  229.   -   Allow LOGEXEC- in Shift F Macros keys........    New    (done)
  230.   -   $$LOGON.BAT not creating a PCBOARD.SYS ??....  **???**  (done)
  231.   -   PROANS displaying even if Automenu not on....  **???**  (done)
  232.   -   Screen coming back on at Modem Reset.(E0)....  **???**  (done)
  233.  
  234.  
  235. ;  New for Prolon.CNF ------------------------------------------------
  236. UPDATE_NET OFF          ; update usernet file every 30 sec at propanel
  237. SHOW_PLUS OFF           ; show "+" plus sign on blank screen
  238. NEW_PANEL ON            ; ON, default OFF, use the new call-waiting scr
  239. FORCE_MSG_SCAN MAIN     ; MAIN, ALL, default OFF,  forces msg scan
  240. FORCE_SCAN_COMMAND N    ; N,Y,S "J" command when force (J N, J Y, etc)
  241. :----------------------------------------------------------------------
  242.  
  243. :---- New Sets  ------------------------
  244. These are the DEFAULTS for the new SETS.  With the exception of the
  245. first one (usage file), NONE are required UNLESS you don't like my
  246. defaults.  If you have the PRE-Release 3.5/1.3 version, you can
  247. now remove ALL but this first one.
  248.  
  249. NOTE:  Upper/Lower case is NOT important BUT... WATCH THE SPACING!!
  250.        There is NO SPACE between the "=" signs and the values!!
  251.  
  252. set usage_file=prostats.dat   ; BBS usage data file
  253.                               ; This one is REQUIRED if you have
  254.                               ; multi-node and want to track usage
  255.                               ; for ALL nodes.
  256.                               ;
  257. set show_flow=OFF             ; eliminates the word [FLOW]
  258. set see_idle=100              ; level required to see idle time
  259. set see_msgline=100           ; level required to see 1st line in Q
  260. set upload_dups=100           ; level to duplicate existing upload
  261. set strict_commands=ON        ; strict interpetation of commands
  262. set show_errors=ON            ; show error, or ignore with no msg
  263. set log_command_errors=ON     ; log command errs to caller log
  264. set allow_disp=OFF            ; totally disable DISP in displays
  265. set max_disp_loc=30           ; ignore any DISP- past column 30
  266. set save_missing_desc=ON      ; no more lost upload descriptions
  267. :---------------------------------------------------
  268.